Shure Cvo-wc White Condenser Microphone

Overview
The Centraverse CVO is a professional, low-profile electret condenser microphone designed for overhead sound reinforcement applications. It includes an integrated directional boom wire for optimal placement above choirs and other ensembles with minimal effort.

Characteristics
Cardioid pickup pattern
Commshield® technology protects you from unwanted RF interference from portable wireless devices (phones, etc.)
Shure's superior design and rugged, reliable construction
25ft XLR cable connected
Elastic ring windbreak included



CVO-W/C: Cardioid, white

Note: Model availability depends on region. Contact your local Shure dealer for additional details.

Facility
Connect the support wire:
Fit the wire into the slot in the microphone body.
Guide the wire through the coil at the end of the wire, starting at the bottom and working toward the exit.
Hang the microphone according to the placement guidelines.
Point the microphone toward the sound source by holding the support wire in place and twisting the microphone body.
If necessary, tie a strong clear thread or fishing line to the loop at the end of the support wire and secure it to a ceiling hook for added stability.
Connect the XLR cable to a mixing console or playback system.
Note: This microphone requires +48V phantom power to operate.


Microphone placement and use
Rule 3:1: If multiple Shure Centraverse overhead microphones are used, the distance between microphones must be three times greater than the distance between the microphone and the sound source.
Choir pickup setup: Place the microphone in front of the choir, above their heads and facing the back row.
Windscreen: Use the supplied windscreen with a snap ring to eliminate wind noise and plosives. To install the windscreen, snap it into the first slot on the microphone head. To remove the windscreen, find the gap in the ring and use a fingernail to pry it off from the right side.